FCP152-Center - Cessna-Style TPM

Increase Immersion in your sim with our latest Cessna152 control panel!

All the necessary controls for flying the Cessna 152 as included in MSFS and X-Plane This control panel has controls for Carb Heat, Throttle, Mixture and Flaps to give you intimate control of your small aircraft.

Carb Heat can be configured for either analog (Potentiometer) or Digital (Joystick buttons), so it works great with any sim!

Throttle is analog with a tension adjustment knob, so you can vary the amount of friction required to move it, or even lock it in place!

Mixture Control is both Push-Pull for coarse adjustment, AND a true rotating Vernier for fine adjustment, just like the real thing! Simply push in on the silver button to release the vernier lock, and it automatically locks back in when you release it.

Flaps control, like the Carb Heat, can be set up for analog OR digital control, so you can use the controls your flight sim supports. In your sim, assign the analog axis to flaps, and by default the lever will move to each of 4 detents to control your flaps. If you want more control over the flaps then you can disable the detents so you can move the lever wherever you want it. If your sim doesn't allow analog flaps, simply assign your flaps increase and decrease to the encoder outputs on button1 and button2.

The unit is made from 3D printed ABS plastic. The heart of the unit is the custom USB joystick controller that is automatically recognized by your operating system, and identifies as a standard HID joystick controller.

A Elevator Trim Wheel is built-in, with an indicator showing the current setting.

A 10 foot USB type A/C cable is provided, and it comes with our standard locking desk mount that screws into the top or bottom of your desk and slots into the top OR bottom of the unit for easy removal when not in use.

An optional desk-mount clamp (FCPCLAMP, LPCLAMP), sold separately) can be purchased if you don't want to permanently affix the mounting plate to your desk.

159mm deep x 212mm wide x 203mm tall