Gear-Falcon
V2 Elevator Trim, Desk Mount
V2 Elevator Trim, Desk Mount
Couldn't load pickup availability
Step up your Flight Sim game with our new Version 2 desk-mounted trim wheel assembly!
Designed to give the look and feel of a small aircraft trim wheel, our control is made of rugged 3-D printed PLA plastic, and includes a 50K ohm potentiometer. The assembly is geared to provide almost 3 full turns of the trim wheel, using the entire usable range of the potentiometers rotation, adding precision and realism. Our new curved indicator lets you know how far you are from the neutral position, and makes it easy to center the trim, with tick marks every 40 degrees, and a larger tick mark for center. Greatly increases immersion in your sim, as instead of clicking away on unrealistic keyboard keys, or using your mouse to adjust trim, you can use a control that mimics the real thing.
Comes with three different mounting systems:
1 - Adjustable mounting arm can be screwed into the bottom of your desk or table for a permanent installation.
2 - Adjustable mounting clamp can be attached to most tables and desks... approximately 45mm thickness or less. Easily mounted, and easy to remove for storage when not in use.
3 - Fixed mounting clamp, slightly larger and can accommodate thicker desks/tables.
Both adjustable mounts allow you to easily rotate the trim housing so you can customize it to the desired orientation.
Do not over-tighten the clamp mount! It is recommended to unscrew the clamp partially when not in use, as PLA plastic can deform when left under tension for long periods of time.
USB Control board will appear as a standard HID Joystick controller, identified as a "Gear-Falcon Elevator Trim" in your system devices, and has breakout pins for 8 digital inputs - you can upgrade it by connecting buttons, switches, encoders, etc.
10 foot USB Mini-B cable is included.
Attention MSFS 2020 users: Please remember to turn off "Auto Trim" in the Assistance menu or the AI will not let you trim the aircraft yourself.
If you have problems getting it to work in MSFS 2020 take a look at this video:
Adding your trim.
The trim wheel assembly is approximately 9 inches x 6 inches x 2-1/4 inches wide.
Made of 3-D printed black PLA plastic.
Materials
Materials
Shipping & Returns
Shipping & Returns
Dimensions
Dimensions
Care Instructions
Care Instructions
















